Jinan Wang Te Bei Equipment Co., Ltd.
Jinan Wangtebei Instrument and Equipment Co., Ltd. supply most competitive and suitable test solutions
Add to Cart
GTJ-U950 non-metal ultrasonic detector
Overview of use:
Acoustic transmission method for pile integrity testing; structural concrete compressive strength, crack depth, crack width and defect detection; continuous wall integrity testing; set pile, ultrasonic rebound comprehensive method strength measurement, lack of measurement, crack sounding and measurement The five functions of the wide five are integrated. Geological exploration, rock integrity, weathering evaluation test; mechanical properties of non-metallic materials such as rock mass and concrete.
Features:
Automatic interpretation of sound parameters, real-time dynamic waveform display;
High receiving sensitivity (high recognition ability for weak signals, accurate detection of defect size and range);
Small size, light weight, easy to carry, dual channel, and strong scalability;
Large-capacity rechargeable battery - long-lasting sequel, no worries;
Intelligent processing software - practical, convenient and powerful;
The depth recording wheel is dustproof and waterproof. At the same time, it has wired and wireless connection, which is flexible and convenient;
The first wave is positioned accurately, and the pile body defects are restored in real time on site;
Wifi connection slit width function;
High-performance A8+DSP main control processing unit with 10.4 inch industrial high brightness wide temperature LCD screen;
The transducer spool is designed with a current collecting ring, and the signal cable is retractable to prevent the cable from being twisted.
Applicable standards:
"Technical Specifications for Building Pile Testing"-JGJ 106-2014
"Technical Regulations for Dynamic Testing of Piles in Highway Engineering"-JTG/T F81-01-2004
Technical Regulations for Testing Pile Foundations in Railway Engineering-TB 10218-2008
Code for Building Foundation Testing - DBJ 15-60-2008
"Shenzhen Building Foundation Pile Inspection Procedures"-SJG09-2015
"Technical Specifications for Building Pile Testing"-DGJ08-218-2003
Ultrasonic Testing of Concrete Defects - CECS 21 : 2000
Technical Specification for Ultrasonic Rebound Comprehensive Method for Testing Concrete Strength-CECS 02:2005
"Code for Testing Concrete Strength of Railway Engineering Structures"-TB 10426-2004
Technical Regulations for Concrete Structure Detection of Water Transportation Engineering-JTS 239-2015
"Technical Regulations for Strength Testing of High Strength Concrete"-JGJ/T294-2013
Technical Specification for Rebound Method and Ultrasonic Rebound Comprehensive Method for Testing Pumped Concrete Strength-DBJ/T01-78-2003
Technical Regulations for Testing Concrete Compressive Strength-DG/TJ08-2020-2007
Technical Specification for Ultrasonic Rebound Comprehensive Method for Testing Concrete Strength-DB37/T 2361-2013
Technical Specification for Ultrasonic Rebound Comprehensive Method for Testing Concrete Strength-DBJ53/T-53-2013
Technical Specification for Ultrasonic Rebound Comprehensive Method for Testing Concrete Strength of Highway Engineering-DB51/T1996-2015
Technical Parameters
| Model | GTJ-U950 non-metal ultrasonic detector |
| Main control unit | Built-in A8 industrial control board |
| Display | 10.1 inch, high brightness, TFT color LCD capacitive screen |
| Mode of operation | Touch screen |
| Storage method | Built-in electronic hard disk (≥8GB) + large capacity U disk |
| Number of channels | 3 channels spontaneously received |
| Number of disposable sections | 3 |
| Trigger mode | signal trigger |
| Sampling period (μs) | 0.05~409.6 multiple options |
| Sound time accuracy (μs) | 0.05 |
| Sound time range (μs) | ±1677700 |
| Seam width function | Measuring range: 0~10mm; measuring accuracy: 0.01mm; Connection method: wifi |
| Dynamic range (dB) | 146 |
| Bandwidth (kHz) | 1~500 |
| Receive sensitivity (μV) | ≤10 |
| Gain accuracy (dB) | 0.5 |
| Transmitting voltage (V) | 65, 250, 500, 1000 four adjustable |
| Communication interface | USB, Bluetooth, wifi |
| Working time (h) | ≥8 |
| Power supply mode | Built-in lithium battery External 220V ~ 16V AC / DC |
| Working environment | Temperature (°C)-10°C~+40°C Humidity (RH) < 90% |
| Host size (mm) | 300 × 200 × 55 |
Application areas
The automatic pile measuring system is mainly used for the automatic detection of pile integrity of the cross-hole acoustic wave transmission method, and other functions are exactly the same as the ultrasonic detector.
Ultrasonic transmission method for rapid detection of pile and continuous wall integrity;
Ultrasonic-rebound comprehensive method for testing concrete compressive strength;
Ultrasonic method for detecting concrete crack depth, uncompacted area and honeycomb cavity, joint surface quality, thickness of surface damage layer, internal defects of concrete filled steel tube;
Ultrasonic single hole one-shot double-receiving logging;
Refractory quality testing;
Geological exploration, rock mass, concrete and other non-metallic materials mechanical properties testing.