Multi Function Rubber Testing Instruments Vulcanizing Time Measuring Device Rubber Rheometer

rubber vulcanizing time measuring device / Multi-Function Rubber Rheometer

It meets the requirements of GB/T16584 "Rubber - Determination of vulcanization characteristics by rotorless vulcanization instrument", ISO6502 requirements and T10, T30, T50, T60, T90 data required by Italian standards. This machine is used to determine the characteristics of unvulcanized rubber and find the suitable curing time of the compound. The machine adopts imported intelligent digital temperature control instrument, which is easy to adjust and set, wide temperature control range and high control precision. Its stability, reproducibility and accuracy are better than those of general rotary vulcanizer. The use of computer control and interface boards for data acquisition, storage, processing and printing of test results, making the function more powerful. It fully demonstrates its highly automated features. Also has curve comparison, amplification and other functions

Product main technical indicators
A. High precision sensor: 0~20N.m.
Resolution: 0.001 N.m.
B. Control system: computer control and interface board for data acquisition, storage, processing and printing test results and curve processing.
C. Rotating system: Stepping Electronics speed motor + amplitude adjuster. Swing angle: ±0.5o ±1o.
D. Temperature control system: Using Inteligent digital temperature control instrument, real-time Automatism adjusts PID control parameters.
Temperature control range 0--200°C, temperature control accuracy ≤±0.3°C, temperature resolution 0.1°C.
E. Data transmission method: RS232 transmission
F. Display mode: Vulcanize-105+WIN-XP test software computer screen display, plus excellent user software and advanced hardware equipment make the whole measurement very convenient, fast, accurate and pleasant.
G. Cavity: Cr6wv material, in line with GB/T16584-1996 standard requirements.
F. Measurement and control method: humanized measurement and control method, mouse click-to-use or host panel touch button

Product standard function introduction
A. Test standardization: in accordance with GB/T16584 "Rubber - Determination of characteristic vulcanization with a rotorless vulcanizer", ISO6502: 1991 and ASTM D5289-95.
B. Sample data: set the rubber number name, such as "tire 5", "RBS6" and so on. If you need to add a title name to explain the printed drawings, you can set any description of the title text.
C. Special description of high-quality function: The excellent function of humanized design is that the measurement time can be modified during the test. The compound is estimated to be vulcanized in 20 minutes, and the measurement time is 20 minutes. When it is 11 minutes, 9 points are found, and 10 minutes are found. After the vulcanization is completed, it is no longer necessary to proceed down. Just divide the 20 points under the “Modification Measurement Time” into 9 or 10 points. Press “Send” and the experiment will stop at 9 or 10 points immediately. Draw the complete picture. The vulcanization curve calculates all the data. If the experiment is 18 points, the vulcanization curve is still rising at the end of 19 minutes, the vulcanization is not completed, and the experiment must be done again, otherwise the data obtained is wrong. At this time, the measurement time can be modified to 25 minutes or more, and the experiment can be continued until the vulcanization is completed. This function is undoubtedly greatly convenient for the user, saving valuable time and rubber.
D. Auto Scale, after the measurement is completed, the software will automatically adjust the Y scale according to the measured value, 0-5 Mv 0-10Mv 0-20Mv, so that the curve is more beautiful, multi-curve contrast, completely different rubber compound Different curve shapes, different measurement times, can also be compared.
E. Database: The software pre-sets a database of 100 numbers. Each library can store unlimited sets of measurement data. Faced with months and years, thousands of data sets are easy to query in the future. Users can put data from different time periods into different databases. The purpose of setting the database address is here.
F. The test ends with automatic archiving, and the test automatically calculates t10, t30, t50, t70, t90, ts1, ts2, Vc1, Vc2, maximum torque, minimum torque and so on.
Product use standard accessories
A. One year warranty.
B. A test software for the vulcanizer.
C. One set of brand computers and one color printer.

Product main counting index
A. Temperature range: 0°C-200°C
B. Temperature measurement accuracy: ≤ ±0.3°C
C. Temperature control accuracy: ≤ ±0.3 °C
D. Temperature resolution: 0.1 ° C
E. Torque range: 0-10N.m 0-20N.m
F. Torque resolution: 0.001N.m
G. Cavity frequency: 1.7Hz
H. Amplitude: ±0.5o ±1o
I. Ambient temperature: 0-35 ° C Relative humidity
J. Size: 540*660*1100