The concrete hammer is a resilience of a momentary elastic deformation generated by a spring-driven bombing and hitting the concrete surface by the impact rod, causing the hammer to bounce the pointer back and indicate the distance of the rebound. The rebound strength (the ratio of the bounce distance to the distance between the impact hammer and the impact bar before impact, calculated as a percentage) is one of the indicators related to the compressive strength of the concrete to estimate the compressive strength of the concrete.
Pointer length: 20.0 ± 0.2 (mm)
Pointer friction: 0.65 ± 0.15 (N)
The radius of the end of the striking rod: 25 ± 1.0 (mm)
Spring tension of the spring: 785.0±40.0 (N/m)
Hammer decoupling position: tick "100" engraved line
Stroke tension spring working length: 61.5.0±0.3 (mm)
Hammer impact length: 75±0.3
Bounce hammer take-off position: scale "0"
Steel anvil rate setting: 80±2

Product Tags:

Rebound Manual Schmidt Concrete Test Hammer , Civil Testing Equipment

Electronic Universal Testing Machine

Electronic Tensile Testing Machine

Hydraulic Universal Testing Machine

Hydraulic Tensile Testing Machine

Compression Testing Machine

Concrete Testing Machine

Stress Relaxation Testing Machine

Horizontal Tensile Testing Machine

Ring Stiffness Testing Machine

Flexural Testing Machine

Anchorage Testing Machine

Universal Material Testing Machine

Tensile Strength Testing Machine

Civil Engineering Testing Equipment

Rubber Testing Instruments

Non Destructive Testing Equipment

Rebound Manual Schmidt Concrete Test Hammer , Civil Testing Equipment

rebound hammer test for concrete

rebound hammer test of concrete

rebound hammer test on concrete