1. introduction
This compression testing machine is suitable for compression strength test of cement, concrete, brick, etc. And if equipped with suitable test fixtures, it can make test of splitting tensile test, flexural and bending test, static elastic modulus test etc.
2. Specification
| No. |
Product name |
Digital display concrete compression testing machine |
| 1 |
model |
YES-2000 |
YES-3000 |
| 2 |
Max. capacity |
2000KN |
3000KN |
| 3 |
Force measuring range |
4%-100% |
| 4 |
Relative error of test force |
≤±1% |
| 5 |
Control mode |
Manual control and hydraulic loading |
| 6 |
Ball screw adjusting mode |
Manual |
Electrical adjusting |
| 7 |
Size of upper and lower compression plate |
Upper: Φ225mm
Lower: Φ300
|
370x370mm |
| 8 |
Max. compression space |
320mm |
330mm |
| 9 |
Piston stroke |
30mm |
50mm |
| 10 |
Diameter of piston |
250 |
310mm |
| 11 |
Rated pressure of oil pump |
40 |
40Mpa |
| 12 |
Power |
3 phase 0.75kW |
3 phase 1.1kW |
| 13 |
Dimension |
800x500x1200 |
1000x600x1500mm |
| 14 |
Weight |
1200kg |
1800kg |
| No. |
Product name |
Computer control concrete compression testing machine |
| 1 |
Model |
YAW-2000 |
YAW-3000 |
| 2 |
Max. capacity |
2000KN |
3000KN |
| 3 |
Force measuring range |
2%-100%FS |
| 4 |
Relative error of test force |
≤±1% |
| 5 |
Ball screw adjusting mode |
Electrical |
| 6 |
Size of upper and lower compression plate |
370x370mm |
400x500mm |
| 7 |
Max. distance between upper and lower compression plate |
330mm |
500mm |
| 8 |
Max. stroke of piston |
100mm |
150mm |
| 9 |
Piston diameter |
310mm |
400mm |
| 10 |
Rated pressure of oil pump |
40Mpa |
| 11 |
Power |
3 phase 1.1kW |
| 12 |
Dimension |
700x700x1600mm |
800x800x1800mm |
| 13 |
Weight |
1600kg |
2300kg |
Frame
· Four column high stiffness welded frame tested for stability.
· Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test.
Compression platens
· Series TM-42DA fitted with 240 mm diameter platens, which are suitable for testing cylinders up to dia. 100 x 200 mm, 150 x 200 mm and cubes up to 150 mm.
· Surface hardness of platen is 55 HRC, flatness tolerance 0.03 mm. Traceable certificate of surface hardness available on request.
· Attachment for Paver block testing is available at extra cost.
Safety features
· Max. pressure valve to avoid machine overloading
· Piston travel limit switch (Extra cost)
· Emergency stop button
