1. introduction
This compression testing machine is suitable for compression strength test of cement, concrete, brick, etc. And if equipped with suitable test fixtures, it can make test of splitting tensile test, flexural and bending test, static elastic modulus test etc.
Compression and upset test for metal materials can be completed on this compression testing machine. And more than one displacement or deformation measuring device can be equipped for requirement. It is the very testing machine for scientific research institutions, cement quality control, industrial and mining enterprises, etc.
2.Specification
| No. |
Product name |
Digital display concrete compression testing machine |
| 1 |
model |
YES-2000 |
YES-3000 |
| 2 |
Max. capacity |
2000KN |
3000KN |
| 3 |
Force measuring range |
4%-100% |
| 4 |
Relative error of test force |
≤±1% |
| 5 |
Control mode |
Manual control and hydraulic loading |
| 6 |
Ball screw adjusting mode |
Manual |
Electrical adjusting |
| 7 |
Size of upper and lower compression plate |
Upper: Φ225mm
Lower: Φ300
|
370x370mm |
| 8 |
Max. compression space |
320mm |
330mm |
| 9 |
Piston stroke |
30mm |
50mm |
| 10 |
Diameter of piston |
250 |
310mm |
| 11 |
Rated pressure of oil pump |
40 |
40Mpa |
| 12 |
Power |
3 phase 0.75kW |
3 phase 1.1kW |
| 13 |
Dimension |
800x500x1200 |
1000x600x1500mm |
| 14 |
Weight |
1200kg |
1800kg |
| No. |
Product name |
Computer control concrete compression testing machine |
| 1 |
Model |
YAW-2000 |
YAW-3000 |
| 2 |
Max. capacity |
2000KN |
3000KN |
| 3 |
Force measuring range |
2%-100%FS |
| 4 |
Relative error of test force |
≤±1% |
| 5 |
Ball screw adjusting mode |
Electrical |
| 6 |
Size of upper and lower compression plate |
370x370mm |
400x500mm |
| 7 |
Max. distance between upper and lower compression plate |
330mm |
500mm |
| 8 |
Max. stroke of piston |
100mm |
150mm |
| 9 |
Piston diameter |
310mm |
400mm |
| 10 |
Rated pressure of oil pump |
40Mpa |
| 11 |
Power |
3 phase 1.1kW |
| 12 |
Dimension |
700x700x1600mm |
800x800x1800mm |
| 13 |
Weight |
1600kg |
2300kg |
Pumping Unit with choice of compact power pack attached closely to the loading unit or separate hydraulic pumping unit, attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing.
